Use Port Forwarding to Access Applications in a Cluster

This page shows how to use kubectl port-forward to connect to a MongoDB server running in a Kubernetes cluster. This type of connection can be useful for database debugging.

Before you begin

• You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

  • Killercoda
  • Play with Kubernetes
  Your Kubernetes server must be at or later than version v1.10. To check the version, enter kubectl version.
• Install MongoDB Shell.

Creating MongoDB deployment and service

1. Create a Deployment that runs MongoDB:

   kubectl apply -f https://k8s.io/examples/application/mongodb/mongo-deployment.yaml
   

   The output of a successful command verifies that the deployment was created:

   deployment.apps/mongo created
   

   View the pod status to check that it is ready:

   kubectl get pods
   

   The output displays the pod created:

   NAME                     READY   STATUS    RESTARTS   AGE
   mongo-75f59d57f4-4nd6q   1/1     Running   0          2m4s
   

   View the Deployment's status:

   kubectl get deployment
   

   The output displays that the Deployment was created:

   NAME    READY   UP-TO-DATE   AVAILABLE   AGE
   mongo   1/1     1            1           2m21s
   

   The Deployment automatically manages a ReplicaSet. View the ReplicaSet status using:

   kubectl get replicaset
   

   The output displays that the ReplicaSet was created:

   NAME               DESIRED   CURRENT   READY   AGE
   mongo-75f59d57f4   1         1         1       3m12s
   

2. Create a Service to expose MongoDB on the network:

   kubectl apply -f https://k8s.io/examples/application/mongodb/mongo-service.yaml
   

   The output of a successful command verifies that the Service was created:

   service/mongo created
   

   Check the Service created:

   kubectl get service mongo
   

   The output displays the service created:

   NAME    TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)     AGE
   mongo   ClusterIP   10.96.41.183   <none>        27017/TCP   11s
   

3. Verify that the MongoDB server is running in the Pod, and listening on port 27017:

   # Change mongo-75f59d57f4-4nd6q to the name of the Pod
   kubectl get pod mongo-75f59d57f4-4nd6q --template='{{(index (index .spec.containers 0).ports 0).containerPort}}{{"\n"}}'
   

   The output displays the port for MongoDB in that Pod:

   27017
   

   27017 is the official TCP port for MongoDB.

Forward a local port to a port on the Pod

1. kubectl port-forward allows using resource name, such as a pod name, to select a matching pod to port forward to.

   # Change mongo-75f59d57f4-4nd6q to the name of the Pod
   kubectl port-forward mongo-75f59d57f4-4nd6q 28015:27017
   

   which is the same as

   kubectl port-forward pods/mongo-75f59d57f4-4nd6q 28015:27017
   

   or

   kubectl port-forward deployment/mongo 28015:27017
   

   or

   kubectl port-forward replicaset/mongo-75f59d57f4 28015:27017
   

   or

   kubectl port-forward service/mongo 28015:27017
   

   Any of the above commands works. The output is similar to this:

   Forwarding from 127.0.0.1:28015 -> 27017
   Forwarding from [::1]:28015 -> 27017
   

   Note: kubectl port-forward does not return. To continue with the exercises, you will need to open another terminal.

2. Start the MongoDB command line interface:

   mongosh --port 28015
   

3. At the MongoDB command line prompt, enter the ping command:

   db.runCommand( { ping: 1 } )
   

   A successful ping request returns:

   { ok: 1 }
   

Optionally let kubectl choose the local port

If you don't need a specific local port, you can let kubectl choose and allocate the local port and thus relieve you from having to manage local port conflicts, with the slightly simpler syntax:

kubectl port-forward deployment/mongo :27017

The kubectl tool finds a local port number that is not in use (avoiding low ports numbers, because these might be used by other applications). The output is similar to:

Forwarding from 127.0.0.1:63753 -> 27017
Forwarding from [::1]:63753 -> 27017

Discussion

Connections made to local port 28015 are forwarded to port 27017 of the Pod that is running the MongoDB server. With this connection in place, you can use your local workstation to debug the database that is running in the Pod.

What's next

Learn more about kubectl port-forward.